Features and benefits
Lighting car HiLight V5+NEO
Lighting upgrade, new SMD LED technology
HiLight V5+ NEO
Do you need spare parts?
HardHat ® Chassis technology
Atlas Copco Hilight V5+NEO
5000 m ² lighting area
Provide an average illumination brightness of 20 lux
Equipped with new SMD LED technology
Meet any on-site requirements
Fuel consumption is only 0.45 liters per hour
Low operating costs
600 hour maintenance interval
A carefully designed lighting vehicle should be able to ensure easy maintenance of the engine, AC generator, control panel, and emission points.
63 dB (A) at 7 meters
Due to its very quiet operation, it is suitable for use in areas with strict noise control
HiLight V5+NEO lighting car
HiLight V5+NEO is equipped with new SMD LED technology, which is compact in structure, durable in fastening, efficient in energy saving, and environmentally friendly in configuration. It is specially designed for night construction lighting and widely used in construction sites, mining lighting, railways, airport lighting, earthquake rescue, flood control and disaster relief, fire rescue, traffic emergency, power repair, emergency supplies, garbage disposal sites, etc., to safeguard your night construction and ensure the safety and efficiency of night construction.
Transportation efficiency A 40 foot trailer can carry up to 16 desk lamps, while a 53 foot trailer can carry up to 20 desk lamps. After delivery, the manual lamp post can be raised to a height of 7.5 meters (24'6 ") and remain stable at a wind speed of 80 km/h.
HardHat ® Chassis technology
The HardHat polyethylene housing of Atlas Copco is corrosion resistant, light in weight and free from cracking. It can protect the lamp car on site, protect its important internal components, ensure optimal performance and maintain beauty, and make the lamp car withstand years of continuous and stable work.
Easy to maintain
The oil maintenance interval has been extended to 600 hours, further reducing operating costs.
Lighting car HiLight V5+NEO
Lighting upgrade, new SMD LED technology
HiLight V5+ NEO
Do you need spare parts?
HardHat ® Chassis technology
Atlas Copco Hilight V5+NEO
5000 m ² lighting area
Provide an average illumination brightness of 20 lux
Equipped with new SMD LED technology
Meet any on-site requirements
Fuel consumption is only 0.45 liters per hour
Low operating costs
600 hour maintenance interval
A carefully designed lighting vehicle should be able to ensure easy maintenance of the engine, AC generator, control panel, and emission points.
63 dB (A) at 7 meters
Due to its very quiet operation, it is suitable for use in areas with strict noise control
HiLight V5+NEO lighting car
HiLight V5+NEO is equipped with new SMD LED technology, which is compact in structure, durable in fastening, efficient in energy saving, and environmentally friendly in configuration. It is specially designed for night construction lighting and widely used in construction sites, mining lighting, railways, airport lighting, earthquake rescue, flood control and disaster relief, fire rescue, traffic emergency, power repair, emergency supplies, garbage disposal sites, etc., to safeguard your night construction and ensure the safety and efficiency of night construction.
Transportation efficiency A 40 foot trailer can carry up to 16 desk lamps, while a 53 foot trailer can carry up to 20 desk lamps. After delivery, the manual lamp post can be raised to a height of 7.5 meters (24'6 ") and remain stable at a wind speed of 80 km/h.
HardHat ® Chassis technology
The HardHat polyethylene housing of Atlas Copco is corrosion resistant, light in weight and free from cracking. It can protect the lamp car on site, protect its important internal components, ensure optimal performance and maintain beauty, and make the lamp car withstand years of continuous and stable work.
Easy to maintain
The oil maintenance interval has been extended to 600 hours, further reducing operating costs.
|
Hilight V5+ NEO Technical parameters of mobile lighting vehicle
|
||
|
|
|
50Hz
|
|
Model
|
unit
|
Hilight V5+ NEO
|
|
Rated speed
|
rpm
|
1500
|
|
Power factor
|
|
0.8 (lag)
|
|
Output power supply
|
|
230V, single phase
|
|
Noise level at 7 meters
|
Db(A)
|
63 db
|
|
Transport dimensions
|
L×W×H(mm）
|
1670*1100*2500
|
|
Operating size
|
L×W×H(mm）
|
2904*2318*7516
|
|
Operating weight
|
kg
|
702
|
|
Engine:
|
||
|
Compliant standards
|
|
ISO 3046 / ISO8528-2
|
|
Manufacturer
|
|
Kubota
|
|
Model
|
|
Z482
|
|
Rated power
|
kW
|
3.4
|
|
No. of cylinders
|
|
2
|
|
Cooling method
|
|
water-cooling
|
|
Generator
|
||
|
Compliant standards
|
|
EN50081-1/EN50082-1
|
|
Manufacturer
|
|
Atlas Copco
|
|
Model
|
|
ACA132B
|
|
Insulation level of stator/rotor
|
|
H / H
|
|
Protection grade
|
IP
|
23
|
|
Fuel tank
|
||
|
Fuel tank capacity
|
L
|
110
|
|
Sustainable operating time
|
h
|
240
|
|
Power output switch
|
||
|
Output switch capacity
|
kW
|
1
|
|
Light
|
||
|
Type
|
|
4 LED lights (SMD type)
|
|
Capacity
|
W
|
4*250
|
|
Luminous flux
|
lm
|
4*38750
|
|
Mast
|
||
|
Type
|
|
Vertical lifting/5-stage/torque 1200kg
|
|
Maximum height of the whole machine
|
m
|
7.5
|
|
Rotation angle
|
℃
|
360
|
|
Wind resistance
|
km/h
|
80
|
|
Box/trailer
|
||
|
Type
|
|
Integrated/4-pod support type
|
|
Tire
|
|
155R13
|
|
Box structure/materials
|
|
Wing shaped opening structure/polyethylene
safety helmet plastic shell |
|
Limited condition
|
||
|
Maximum operating environment temperature
|
℃
|
50
|
|
Maximum altitude for use
|
m
|
3000
|
|
Minimum operating
ambient temperature |
℃
|
-25
|
