Collection: Air Dryer

This collection is a range of plate fin refrigerated compressed air dryers, sized by flow from 6.5 m3/min in the SMD065L to 50 m3/min in the SMD500L. Each model is listed against the screw compressor power class it typically serves, from 30 kW at the small end to 250 kW at the large end, which makes it straightforward to match a dryer to a machine you already have.

Dryer Flow Matches compressor
SMD065L 6.5 m3/min 30 to 37 kW / 40 to 50 HP
SMD085L 8.5 m3/min 45 to 55 kW / 60 to 75 HP
SMD115L 11.5 m3/min 75 kW / 100 HP
SMD135L 13.5 m3/min 90 kW / 125 HP
SMD170L 17 m3/min 110 kW / 150 HP
SMD200L 20 m3/min 132 kW / 180 HP
SMD250L 25 m3/min 160 kW / 220 HP
SMD340L 34 m3/min 185 to 200 kW / 250 to 270 HP
SMD400L 40 m3/min 220 kW / 300 HP
SMD500L 50 m3/min 250 kW / 350 HP

How to choose

Match on flow, then correct for conditions. The flow on the model sheet is stated at a reference inlet condition; a dryer installed after a hot compressor in a warm room has less real capacity than the nominal figure. Give us the compressor model, the ambient temperature in the plant room and the working pressure, and the dryer can be sized against actual duty.

Consider the dew point you actually need. A refrigerated dryer reaches roughly 3 degrees C pressure dew point, which suits general plant air and outdoor piping. It does not suit instrument air, breathing air, or any line that passes through a freezing environment. Those cases need a desiccant dryer, which is a different product category.

What we need to quote

  • Compressor model and free air delivery
  • Working pressure
  • Inlet air temperature and ambient room temperature
  • Required pressure dew point
  • Voltage and available floor space

Common questions

Can I use a larger dryer than the compressor needs? Yes, and it is sometimes sensible where ambient conditions are severe, but an oversized dryer cycles less efficiently. Size to corrected duty rather than adding a blanket margin.

Where does the dryer go in the system? After the compressor and aftercooler, before the filters and the receiver. Putting it in the wrong place reduces its capacity.

Is filtration included? No. Filters are separate. A dryer removes water but not oil aerosol or particulate.

13 products